Pulse Output Module FX2N-1PG-E Features 1, equipped with seven easy positioning control mode of operation. 2, a block control an axis. Up to 8 blocks can be connected to the FX2N Series PLC, Up to 4 blocks can be connected to the FX2NC series PLC, a separate multi-axis control. 3, the output pulse train 100KHZ. 4, issued by the control program along. Gram perform positioning control.

Specifications: 1, the control axis: 1 (a PC, the largest single-axis control 8.) 2, the instruction speed: in the pulse rate between 10HZ to 100KHZ work. Command unit In the HZ, cm / min, 10deg/min and inch / min to choose between. 3, set the pulse: 0 ± 999.999 can choose absolute or relative stroke position specifications Specifications. Command unit can pulse, mm, mdeg and choose between 10-4inch Optional. Two-position data can be set to 100,101,102, or 103 times. Pulse output format: You can choose forward (FP) and anti-all (RP) pulse or With the direction (DIR) of the pulse (PLS). Or transistor open collector output Out. 5-24V DC, less than 20mA. 4, the points with the I / O points: 8 points with this block input or output point (which may be lost Income or output). 5, for the controller: FX2N, FX2NC (required FX2NC-CNV-IF) 6, size (width) x (thickness) x (high): 43x87x90mm (1.69x3.43x3.54 inch) 7, mass (weight): 0.5kg (0.44lbs)

http://dcmax.diytrade.com